Green Leaf Joypad Driver Mgj-2011 33 ##TOP##
Download ->>->>->> https://urluss.com/2tABpd
How to Install and Use Green Leaf Joypad MGJ-2011
Green Leaf Joypad MGJ-2011 is a wireless game controller that can be used with PC games. It has a dual vibration function, 12 buttons, and a 2.4 GHz wireless receiver. It is compatible with Windows XP, Vista, 7, 8, and 10. In this article, we will show you how to install and use Green Leaf Joypad MGJ-2011 on your PC.
Step 1: Download and Install the Driver
The first step is to download and install the driver for Green Leaf Joypad MGJ-2011. You can find the driver file on the official website of Green Leaf or on some online forums[^1^] [^2^]. The file name is Green_Leaf_Joypad_Driver_Mgj2011.exe. After downloading the file, double-click on it and follow the instructions to install the driver on your PC.
Step 2: Connect the Joypad to Your PC
The next step is to connect the joypad to your PC. You will need two AA batteries to power the joypad. Insert the batteries into the battery compartment on the back of the joypad. Then, plug the wireless receiver into a USB port on your PC. The receiver has a blue LED light that will flash when it is connected. Next, press and hold the Home button on the joypad for a few seconds until the four LED lights on the joypad flash. This means that the joypad is in pairing mode. Wait for a few seconds until one of the LED lights stays on. This means that the joypad is paired with the receiver.
Step 3: Test and Configure the Joypad
The last step is to test and configure the joypad. You can use a software called joy.cpl to test if the joypad is working properly. To open this software, go to Start > Run > type joy.cpl > press Enter. You will see a window that shows all the connected game controllers on your PC. Select Green Leaf Joypad MGJ-2011 and click on Properties. You will see another window that shows the buttons, axes, and vibration of the joypad. You can press each button and move each axis to see if they are detected by the software. You can also click on Test Force Feedback to test if the vibration function is working.
If you want to configure the joypad settings, you can click on Settings in the same window. You will see another window that allows you to adjust the sensitivity, dead zone, calibration, and force feedback of the joypad. You can change these settings according to your preference and click on OK to save them.
Conclusion
In this article, we have shown you how to install and use Green Leaf Joypad MGJ-2011 on your PC. We hope this article was helpful for you. If you have any questions or problems with using Green Leaf Joypad MGJ-2011, please feel free to contact us or leave a comment below.How to Use Green Leaf Joypad MGJ-2011 with PC Games
After installing and configuring Green Leaf Joypad MGJ-2011 on your PC, you can use it with any PC games that support game controllers. However, some games may not recognize the joypad automatically or may have different button mappings. In this case, you may need to use a software called x360ce to emulate an Xbox 360 controller with Green Leaf Joypad MGJ-2011. Here are the steps to use x360ce with Green Leaf Joypad MGJ-2011:
Download x360ce from https://www.x360ce.com/. You will need the 32-bit or 64-bit version depending on your game.
Extract the x360ce.zip file to a folder on your PC.
Copy the x360ce.exe file to the same folder where your game executable is located. For example, if your game is C:\\Program Files\\Steam\\steamapps\\common\\GameName\\Game.exe, then copy x360ce.exe to C:\\Program Files\\Steam\\steamapps\\common\\GameName\\.
Run x360ce.exe. You will see a window that asks you to create a new configuration file. Click on Create.
You will see another window that shows the detected controllers on your PC. Select Green Leaf Joypad MGJ-2011 and click on Next.
You will see another window that shows the button mappings for Green Leaf Joypad MGJ-2011. You can change these mappings according to your preference or use the default ones. Click on Finish.
You will see another window that shows the settings for Green Leaf Joypad MGJ-2011. You can change these settings according to your preference or use the default ones. Click on Save.
You will see another window that shows the status of Green Leaf Joypad MGJ-2011. You can test if the joypad is working properly by pressing each button and moving each axis. You can also click on Vibration Test to test if the vibration function is working.
Close x360ce.exe. You will see a new file called xinput1_3.dll in the same folder where your game executable is located.
Run your game. The game should recognize Green Leaf Joypad MGJ-2011 as an Xbox 360 controller and use the button mappings and settings that you have configured with x360ce.
Note: You may need to repeat these steps for each game that you want to use with Green Leaf Joypad MGJ-2011. You may also need to rename the xinput1_3.dll file to a different version depending on your game. For example, some games may require xinput9_1_0.dll or xinput1_4.dll. You can find more information about this on the official website of https://www.x360ce.com/.
Conclusion
In this article, we have shown you how to use Green Leaf Joypad MGJ-2011 with PC games that support game controllers. We hope this article was helpful for you. If you have any questions or problems with using Green Leaf Joypad MGJ-2011 with PC games, please feel free to contact us or leave a comment below. 061ffe29dd